HB802-Nano Barium Sulfate Masterbatch Physical property index

○ Commonly the particle size range of nano-barium sulfate master batch is 100-300nm, but if there is special requirements from customers, the size of nano-barium sulfate could be regulated by adjusting the type of nano-calcium according to product application requirement.

○ The concentration range of nano- barium sulfate master batch is 50-80% and the concrete concentration is based on the application request of products, equipment dispersing power and production technology.

○ The carrier of nano- barium sulfate master batch could be LLDPE, MLLDPE, EVA, POE, etc. the carrier type of master batch should be confirmed according to the raw material type and application requirement of products. Appropriate carrier could help products meet the demand of toughness, cold resistance, impact resistance and so on.

○ The melt flow index range of nano-barium sulfate master batch carrier is 2-100g/10min, and the concrete range is determined on the basis of product processing technology and equipment dispersing ability

○ Fictionalization of nano-barium sulfate master batch

It is possible to add uv absorber, anti-ultraviolet agent, anti-static agent, antioxidant, titanium dioxide, brightener and so on to meet the functionalized demands of customers according to the service environment requirement and application requirement of products.

HB802-Nano Barium Sulfate Masterbatch Product application

○ It is suitable for products of PE, PP, EVA, ABS, HIPS, PET, PBT, PA, etc and is applied to film, pipe, non-woven fabrics, board and sheet.

○ Latest application of nano-barium sulfate master batch

PE agricultural film Mixed with resin like LDPE, LLDPE, MLLDPE, POE, EPDM in certain proportion according to the transparency requirement, thickness requirement, weight requirement, mechanical property requirement of the products and put into production in blowing equipment, it could improve incubation and moisturizing properties of blown film. It could block infrared ray effectively by a large margin, reduce breathability of PE products, decrease the emission of heat and moisture, increase incubation and moisturizing properties of film products and effectively promote product and income improvement of corps and fish farms. Temperature in agricultural film adding nano-barium sulfate is 3-5℃ higher than blank film, thus making the corps and fish farms ripening 5-15days earlier and prompting the economic value.

AP non-woven fabrics Mixed with PP resin at a certain ratio and put into production in dedicated device of non-woven fabric according to the weight requirement and mechanical property requirement, the non-woven fabric with nano-barium sulfate is glossy, colorful, of good transparency, environmental and of high hygiene grade which is mainly used for sanitation, clothes, packaging, furniture and so on.